The correct way to clean ceiling fans
Cleaning ceiling fans every week is important to help reduce dust that accumulates on them. With the onset of winter and no longer used, you should not neglect to clean it. Here are the following steps on how to clean ceiling fans in the easiest way, according to Bennuta:
Cleaning steps for ceiling fans
1- Use new fabrics and do not forget to cover your hands with socks or clean gloves, and lightly spray a spray of detergent liquid or plain water with some drops of soap and pass your hands along the edges of each blade or plant the fan (as well as from the top and bottom) although it is a cumbersome process, especially when you stay Your hands on the top are long, but the ceiling fan will be clean.
2- Repeating this action weekly you will not have to worry about dirt and grease accumulating.
3- If a period has passed since the ceiling fan was last cleaned, first try turning off and turning off the power to the fan.
4- Read the instructions that came with it before starting - some recommend against using soap or lotion of any kind.
5- If you have a soft brush for vacuums it is better, you can use it to remove dust.
6- If the fan blades have accumulated grease or dirt and dust. Warm soapy water should be used, and be sure to squeeze the rag or sponge well and remove the excess (if you do not want water to drip into the engine), then gently rub the stains and dirt. Make sure to use one hand and the other holding the fan to achieve stability and not to drop or spin the fan.
7- If the fan is equipped with lighting, you must first remove it carefully and wash it gently in soapy water, then rinse. If the glass is thin or brittle, allow it to air dry instead of a towel dry.
8- When the fan becomes completely dry, return everything to its place and make sure that each screw or lamp is tightly in place so that it does not fall when the fan is turned on.
9- If you notice dust around the motor, wipe it gently with a piece of cloth and the voids without getting as close as you can to the base.
10- When you are done and everything returns to its place, turn on the fan and monitor it, and make sure that everything is stable and not vibrating, otherwise turn off the fan immediately and install the parts that vibrate immediately.
